Machine sampler from conveyor discharge point or chute - АО1-08
Purpose and use
Automatic sampler AO1-08 is one element of a comprehensive solution for the selection and preparation of coal samples at the fuel transfer points at thermal power plants. Installed directly on a transfer from the conveyor to the lower marks. The raw material is discharged from the sampler into the receiving chute for the subsequent separation of the mass in the sample-cutting machine.
Descriptions
Parameters | Value |
Fuel flow power, not more, t/h | 800 |
Conveyor belt width, mm | 800 |
Lump size of material sampling, not more, mm | 60 |
Operating mode | cyclical |
Sampling method | for one selection |
Period between selection, min: minimum, min maximum, min |
2 20 |
Number of selective elements (drives) | 1 |
Opening width of selective element, mm | 110; 160 |
Length of selective element, (one/total), mm | 800/800 |
Speed of selective elements, m/s | 10 |
Force of spring of percussive mechanism, H | 12000 |
Electric drive of percussive mechanism | |
power, kWt | 0,5 |
voltage, V | 380 |
frequency Hz | 50 |
Dimensions | |
width, mm | 1908 |
length mm | 2445 |
height, mm | 2135 |
Mass, kg | 1280 |