Machine sampler from conveyor discharge point or chute - AO2-16
Purpose and use
Machine sampler AO2-16 is installed at the top of the conveyor drum and sampling coal from the falling stream. The bunker drive, slide gate, sampling machine and screw (scraper) conveyor are mounted at the lower elevations, with the dropout dropped after the reduction to the underlying conveyor. Sampling equipment is controlled from the control cabinet.
Description
Parameters | Value |
Fuel flow power, not more, t/h | 2500 |
Conveyor belt width, mm | 1600 |
Lump size of material sampling, not more, mm | 60 |
Operating mode | cyclical |
Sampling method | for one selection |
Period between selection, min: minimum, min maximum, min |
2 20 |
Number of selective elements (drives) | 2 |
Opening width of selective element, mm | 110; 160 |
Length of selective element, (one/total), mm | 700/1400 |
Speed of selective elements, m/s | 10 |
Force of spring of percussive mechanism, H | 12000 |
Electric drive of percussive mechanism | |
power, kWt | 0,5 |
voltage, V | 380 |
frequency Hz | 50 |
Dimensions | |
width, mm | 2880 |
length mm | 2450 |
height, mm | 2460 |
Mass, kg | 2625 |